Cisco Catalyst 3750 Metro - Show Platform Ip Multicast

C-9
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform ip multicast
show platform ip multicast
Use the show platform ip multicast privileged EXEC command to display platform-dependent IP
multicast tables and other information.
show platform ip multicast {acl-full-info | counters | groups | hardware [detail] | interfaces | |
mds | retry {mdb | mroute} | trace}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
acl-full-info Display ACL-full multicast route information.
counters Display IP multicast counters and statistics.
groups Display IP multicast routes per group.
hardware [detail] Display IP multicast routes loaded into hardware. The optional detail
keyword is used to show port members in the destination index and route
index.
interfaces Display IP multicast interfaces.
mds Display multicast distributed fast switching (MDFS) IP multicast routes.
retry {mdb | mroute} Display the IP multicast routes in the retry queue. The keywords have these
meanings:
• mdb—Display the multicast routes in retry queue waiting for hardware.
• mroute—Display the multicast routes in the retry queue, waiting for the
destination and route index.
trace Display the IP multicast trace buffer.
Release Modification
12.1(14)AX This command was introduced.