Cisco Catalyst 3750 Metro

C-4
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform configuration
show platform configuration
Use the show platform configuration privileged EXEC command to display platform-dependent
configuration-manager related information.
show platform configuration {config-output | default | running | startup}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
config-output Display the output of the last auto-configuration application.
default Display whether or not the system is running the default configuration.
running Display a snapshot of the backed-up running configuration on the local
switch.
startup Display a snapshot of the backed-up startup configuration on the local switch.
Release Modification
12.1(14)AX This command was introduced.