Cisco Catalyst 3750 Metro

B-47
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug platform dot1ad
debug platform dot1ad
To enable debugging of IEEE 802.1ad tagging, use the debug platform dot1ad privileged EXEC
command. To disable debugging, use the no form of the command.
debug platform dot1ad [error | events | receive | transmit]
no debug platform dot1ad [error | events | receive | transmit]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform dot1ad command is the same as the no debug platform dot1ad command.
When you enter debug platform dot1ad with no keywords, all 802.1ad debug messages appear.
Related Commands
error Displays 802.1ad error messages.
events Displays 802.1ad event debug messages.
receive Displays 802.1ad receive debug messages.
transmit Displays 802.1ad sent debug messages.
Release Modification
12.2(54)SE This command was introduced.
Command Description
show debugging Displays information about the enabled types of debugging.