Cisco Catalyst 3750 Metro User Manual

B-62
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug platform mpls
debug platform mpls
Use the debug platform mpls privileged EXEC command to enable debugging of the multiprotocol
label switching (MPLS) control layer. Use the no form of this command to disable debugging
debug platform mpls {backwalk | encaps | errors | events | lspv | np | timer}
no debug platform mpls {backwalk | encaps | errors | events | lspv | np | timer}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug platform mpls command is the same as the no debug platform mpls command.
Related Commands
backwalk Display MPLS backwalk messages.
encaps Display MPLS encapsulation messages.
errors Display MPLS error messages.
events Display all MPLS event messages.
lspv Display MPLS label-switched path verification (LSPV) messages.
np Display MPLS network processor (NP) messages.
timer Display MPLS timer messages.
Release Modification
12.2(37)SE This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.

Cisco Catalyst 3750 Metro Specifications

General

Brand	Cisco
Model	Catalyst 3750 Metro
Category	Switch
Language	English