Cisco Catalyst 3750 Metro - Show Class-Map

2-438
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show class-map
show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
show class-map [class-map-name]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-all videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-all dscp5 (id 3)
Match ip dscp 5
Related Commands
class-map-name (Optional) Display the contents of the specified class map.
Release Modification
12.1(14)AX This command was introduced.
Command Description
class-map Creates a class map to be used for matching packets to the class
whose name you specify.
match (class-map configuration) Defines the match criteria for a class map.