Cisco Catalyst 3750 Metro - Show Platform Acl

C-2
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform acl
show platform acl
Use the show platform acl privileged EXEC command to display platform-dependent access control list
(ACL) manager information.
show platform acl {interface interface-id | label label-number [detail] | statistics asic-number |
usage asic-number | vlan vlan-id}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
interface interface-id Display per-interface ACL manager information for the specified interface.
The interface can be a physical interface, a port-channel, or a VLAN.
label label-number
[detail]
Display per-label ACL manager information. The label-number range is 0 to
255. The keyword has this meaning:
• detail—(Optional) Display detailed ACL manager label information.
statistics asic-number Display per-ASIC ACL manager information. The asic-number is the port
ASIC number, either 0 or 1.
usage asic-number Display per-ASIC ACL manager usage information. The asic-number is the
port ASIC number, either 0 or 1.
vlan vlan-id Display per-VLAN ACL manager information. The vlan-id range is from 1 to
4094.
Release Modification
12.1(14)AX This command was introduced.