Cisco Catalyst 3750 Metro

2-524
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show l2protocol-tunnel
show l2protocol-tunnel
Use the show l2protocol-tunnel user EXEC command to display information about Layer 2 protocol
tunnel ports. The output displays information for the specified interface or all interfaces with protocol
tunneling enabled.
show l2protocol-tunnel [interface interface-id] [summary]
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show l2protocol-tunnel command:
Switch> show l2protocol-tunnel
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port Protocol Shutdown Drop Encapsulation Decapsulation Drop
Threshold Threshold Counter Counter Counter
---------- -------- --------- --------- ------------- ------------- -------------
Fa1/0/1 --- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp ---- ---- 0 242500
lacp ---- ---- 24268 242640
udld ---- ---- 0 897960
Fa1/0/2 --- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp 1000 ---- 24249 242700
lacp ---- ---- 24256 242660
udld ---- ---- 0 897960
Fa1/0/3 cdp ---- ---- 134482 1344820
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp 1000 ---- 0 242500
lacp 500 ---- 0 485320
udld 300 ---- 44899 448980
Fa1/0/4 cdp ---- ---- 134482 1344820
--- ---- ---- ---- ---- ----
--- ---- ---- ---- ---- ----
pagp ---- 1000 0 242700
lacp ---- ---- 0 485220
udld 300 ---- 44899 448980
interface interface-id (Optional) Specify the interface for which protocol tunneling information
appears. Valid interfaces are physical ports and port channels; the port
channel range is 1 to 12.
summary (Optional) Display only Layer 2 protocol summary information.
Release Modification
12.1(14)AX This command was introduced.