Cisco Catalyst 3750 Metro - Page 553

2-525
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show l2protocol-tunnel
<output truncated>
This is an example of output from the show l2protocol-tunnel summary command:
Switch> show l2protocol-tunnel summary
COS for Encapsulated Packets: 5
Drop Threshold for Encapsulated Packets: 0
Port Protocol Shutdown Drop Status
Threshold Threshold
(cdp/stp/vtp) (cdp/stp/vtp)
(pagp/lacp/udld) (pagp/lacp/udld)
------- ----------- ---------------- ---------------- ----------
Fa1/0/2 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld ----/----/---- ----/----/----
Fa1/0/3 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld 1000/----/---- ----/----/----
Fa1/0/4 --- --- --- ----/----/---- ----/----/---- up
pagp lacp udld 1000/ 500/---- ----/----/----
Fa1/0/5 cdp stp vtp ----/----/---- ----/----/---- down
---- ---- ---- ----/----/---- ----/----/----
Fa1/0/6 --- --- --- ----/----/---- ----/----/---- down
pagp ---- ---- ----/----/---- 1000/----/----
Fa1/0/7 --- --- --- ----/----/---- ----/----/---- down
pagp ---- ---- ----/----/---- 1000/----/----
Related Commands Command Description
clear l2protocol-tunnel counters Clears counters for protocol tunneling ports.
l2protocol-tunnel Enables Layer 2 protocol tunneling for Cisco Discovery
Protocol (CDP), Spanning Tree Protocol (STP), or VLAN
Trunking Protocol (VTP) packets on an interface.
l2protocol-tunnel cos Configures a class of service (CoS) value for tunneled Layer 2
protocol packets.