Cisco Catalyst 3750 Metro

2-590
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show rep topology
show rep topology
Use the show rep topology User EXEC command to display Resilient Ethernet Protocol (REP) topology
information for a segment or for all segments, including the primary and secondary edge ports in the
segment.
show rep topology [segment segment_id] [archive] [detail]
Syntax Description
Command Modes User EXEC
Command History
Examples This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1 Pri Alt
sw3_multseg_3400 Gi0/13 Open
sw3_multseg_3400 Gi0/14 Alt
sw4_multseg_3400 Gi0/13 Open
sw4_multseg_3400 Gi0/14 Open
sw5_multseg_3400 Gi0/13 Open
sw5_multseg_3400 Gi0/14 Open
sw2_multseg_3750 Gi1/1/2 Open
sw2_multseg_3750 Gi1/1/1 Open
sw1_multseg_3750 Gi1/1/2 Sec Open
segment-id (Optional) Display REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Display the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Display detailed REP topology information.
Release Modification
12.2(40)SE This command was introduced.