2-466
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show ethernet service instance
show ethernet service instance
Use the show ethernet service instance privileged EXEC command to display information about
Ethernet customer-service instances.
show ethernet service instance [id id] [interface interface-id] [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show ethernet service instance command:
Switch# show ethernet service instance
Identifier Interface CE-Vlans
222 FastEthernet0/1 untagged,1-4094
10 FastEthernet0/2
222 FastEthernet0/2 200
333 FastEthernet0/2 default
10 FastEthernet0/3 300
11 FastEthernet0/3
10 FastEthernet0/4 300
10 FastEthernet0/6 untagged,1-4094
10 FastEthernet0/7 untagged,1-4094
10 FastEthernet0/8 untagged,1-4094
10 FastEthernet0/9 untagged
20 FastEthernet0/9
222 FastEthernet0/11 300-350,900-999
333 FastEthernet0/11 100-200,1000,1999-4094
222 FastEthernet0/12 20
333 FastEthernet0/12 10
10 FastEthernet0/13 10
20 FastEthernet0/13 20
30 FastEthernet0/13 30
200 FastEthernet0/13 222
200 FastEthernet0/14 200,222
300 FastEthernet0/14 333
555 FastEthernet0/14 555
id id (Optional) Display information for the specified service-instance identifier, a
per-interface service identifier that does not map to a VLAN. The range is 1
to 4294967295.
interface interface-id (Optional) Display service-instance information for the specified interface.
detail (Optional) Display detailed information about service instances or the
specified service-instance ID or interface.
Release Modification
12.2(25)SEG This command was introduced.
To Next Page
Loading...
