Cisco Catalyst 3750 Metro - Show Cpu Traffic Qos

2-447
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show cpu traffic qos
show cpu traffic qos
Use the show cpu traffic qos command in user EXEC mode to display the QoS marking values for
CPU-generated traffic.
show cpu traffic qos
Syntax Description This command has no arguments or keywords.
Defaults Displays the QoS marking values for all CPU-generated traffic.
Command Modes User EXEC
Command History
Examples The following is sample output from the show cpu traffic qos command:
CPU QoS configuration:
Switch(config)# cpu traffic qos cos 2
Switch(config)# cpu traffic qos dscp 40
Show command:
Switch> show cpu traffic qos
QOS - CPU Generated Traffic
---------------------------
Set parameter-type
----------------------------------------------
Cos trust
DSCP dscp-mutation map1
Precedence Default
Related Commands
Release Modification
12.2(52)SE This command was introduced.
Command Description
cpu traffic qos cos Configures the CoS value for CPU-generated traffic.
cpu traffic qos dscp Configures the DSCP value for CPU-generated traffic.
cpu traffic qos
precedence
Configures the precedence for CPU-generated traffic.
mls qos map Configures a global map to set CoS, DSCP, and precedence values for
CPU-generated traffic.
show mls qos maps Displays information for all global maps.
show running-config Displays the configured global maps and CPU traffic QoS settings.