Cisco Catalyst 3750 Metro

B-15
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug ip sla error twamp connection
debug ip sla error twamp connection
Use the debug ip sla error twamp connection command in privileged EXEC mode to enable debugging
output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement Protocol
(TWAMP) showing exceptions during communication between the TWAMP client and server. Use the
no form of this command to disable debugging output.
debug ip sla error twamp connection [source-ip ip-address]
no debug ip sla error twamp connection [source-ip ip-address]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The debug ip sla error twamp connection privileged EXEC command displays messages about the
exceptions that occurred during TWAMP communications between the server and reflector.
The undebug ip sla error twamp connection command is the same as the no debug ip sla error twamp
connection command.
Note Use the debug ip sla error twamp connection command before using the debug ip sla trace twamp
connection command because the debug ip sla error twamp connection command generates less
debugging output.
The debug ip sla error twamp connection command is supported in IPv4 networks.
Related Commands
source-ip
ip-address
(Optional) Debug IP Performance Metrics (IPPM) TWAMP connections for
the specified source. Specify the source using the IP address of the client
device.
Release Modification
12.2(52)SE This command was introduced.
Command Description
debug ip sla error twamp
control reflector
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
debug ip sla error twamp
control server
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
debug ip sla error twamp
session
Displays exceptions during communication between the IP SLAs
TWAMP sender and reflector.
debug ip sla trace twamp
connection
Displays the normal communications between an IP SLAs TWAMP
client and server.