Cisco Catalyst 3750 Metro - Show Vtp

2-620
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show vtp
show vtp
Use the show vtp user EXEC command to display general information about the VLAN Trunking
Protocol (VTP) management domain, status, and counters.
show vtp {counters | status}
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show vtp counters command. Table 2-33 describes each field in
the display.
Switch> show vtp counters
VTP statistics:
Summary advertisements received : 0
Subset advertisements received : 0
Request advertisements received : 0
Summary advertisements transmitted : 0
Subset advertisements transmitted : 0
Request advertisements transmitted : 0
Number of config revision errors : 0
Number of config digest errors : 0
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received from
non-pruning-capable device
---------------- ---------------- ---------------- ---------------------------
Fa1/0/17 0 0 0
Fa1/0/18 0 0 0
counters Display the VTP statistics for the switch.
status Display general information about the VTP management domain status.
Release Modification
12.1(14)AX This command was introduced.