Cisco Catalyst 3750 Metro

B-37
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug mpls atom
debug mpls atom
Use the debug mpls atom privileged EXEC command to enable debugging of the Any Transport over
multiprotocol label switching (AToM) layer. Use the no form of this command to disable debugging.
debug mpls atom
no debug mpls atom
Note The Catalyst 3750 Metro switch supports Ethernet over MPLS (EoMPLS), a subset of AToM.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Related Commands
Release Modification
12.1(14)AX This command was introduced.
Command Description
debug mpls
l2transport vlan
Enables debugging of EoMPLS Layer 2 VLANs.
show debugging Displays information about the types of debugging that are enabled.