Cisco Catalyst 3750 Metro

2-465
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show ethernet service evc
show ethernet service evc
Use the show ethernet service evc privileged EXEC command to display information about Ethernet
virtual connection (EVC) customer-service instances.
show ethernet service evc [id evc-id | interface interface-id] [detail]
Syntax Description
Command Modes Privileged EXEC
Command History
Examples This is an example of output from the show ethernet service evc command:
Switch# show ethernet service evc
Identifier Type Act-UNI-cnt Status
BLUE P-P 2 Active
PINK MP-MP 2 PartiallyActive
PURPLE P-P 2 Active
BROWN MP-MP 2 Active
GREEN P-P 3 Active
YELLOW MP-MP 2 PartiallyActive
BANANAS P-P 0 InActive
TEST2 P-P 0 NotDefined
ORANGE P-P 2 Active
TEAL P-P 0 InActive
Related Commands
id evc-id (Optional) Display EVC information for the specified service. The EVC
identifier can be a string of from 1 to 100 characters.
interface interface-id (Optional) Display EVC information for the specified interface.
detail (Optional) Display detailed information about EVC service or the specified
EVC ID or interface.
Release Modification
12.2(25)SEG This command was introduced.
Command Description
ethernet evc evc-id Defines an EVC and enters EVC configuration mode.