Cisco Catalyst 3750 Metro

B-51
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug platform forw-tcam
debug platform forw-tcam
Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
ternary content addressable memory (TCAM) manager. Use the no form of this command to disable
debugging.
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify a keyword, all forwarding TCAM manager debug messages are displayed.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
Related Commands
adjustment (Optional) Display TCAM manager-adjustment debug messages.
allocate (Optional) Display TCAM manager-allocation debug messages.
audit (Optional) Display TCAM manager-audit debug messages.
error (Optional) Display TCAM manager-error debug messages.
move (Optional) Display TCAM manager-move debug messages.
read (Optional) Display TCAM manager-read debug messages.
write (Optional) Display TCAM manager-write debug messages.
Release Modification
12.1(14)AX This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.