Cisco Catalyst 3750 Metro - Show Ip Sla Standards

2-506
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show ip sla standards
show ip sla standards
Use the show ip sla standards command in user EXEC or privileged EXEC mode to display the Cisco
IOS IP Service Level Agreements (SLAs) and Two-Way Active Measurement Protocol (TWAMP)
standards implemented on the switch.
show ip sla standards
Syntax Description This command has no arguments or keywords.
Defaults Displays the IP SLAs and TWAMP standards implemented on the switch.
Command Modes User EXEC
Command History
Usage Guidelines Use the show ip sla standards command to display the IP SLAs TWAMP standards implemented on the
switch.
Examples The following is sample output from the show ip sla standards command:
Switch> show ip sla standards
Feature Organization Standard
TWAMP Server IETF draft-ietf-ippm-twamp-06
TWAMP Reflector IETF draft-ietf-ippm-twamp-06
Related Commands
Release Modification
12.2(52)SE This command was introduced.
Command Description
show ip sla twamp
connection {detail |
requests}
Displays IP SLAs TWAMP connections.
show ip sla twamp
session
Displays IP SLAs TWAMP sessions.