2-540
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show mac address-table count
show mac address-table count
Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
show mac address-table count [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If no VLAN number is specified, the address count for all VLANs appears.
Examples This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for Vlan 10:
---------------------------
Dynamic Address Count : 0
Static Address Count : 0
Total Mac Addresses : 0
Mac Entries for Vlan 1:
---------------------------
Dynamic Address Count : 10
Static Address Count : 0
Total Mac Addresses : 10
Total Mac Address Space Available: 6120
vlan vlan-id (Optional) Display the number of addresses for a specific VLAN. The range is 1 to
4094.
Release Modification
12.1(14)AX This command was introduced.
To Next Page
Loading...
Need help?
General