Cisco Catalyst 3750 Metro - Aaa Authentication Dot1 X

2-4
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
aaa authentication dot1x
If you are not using a RADIUS server, you can use the local or local-case methods, which access the
local username database to perform authentication. By specifying the enable or line methods, you can
supply the clients with a password to provide access to the switch.
Use the show running-config privileged EXEC command to display the configured lists of
authentication methods.
Examples This example shows how to enable AAA and how to create an authentication list for 802.1x. This
authentication first tries to contact a RADIUS server. If this action returns an error, the user is allowed
access with no authentication.
Switch(config)# aaa new-model
Switch(config)# aaa authentication dot1x default group radius none
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command Description
aaa new-model Enables the AAA access control model. For syntax information, select Cisco
IOS Security Command Reference, Release 12.2 > Authentication,
Authorization, and Accounting > Authentication Commands.
show running-config Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_
reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.