Cisco Catalyst 3750 Metro

B-21
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix B Catalyst 3750 Metro Switch Debug Commands
debug ip sla error twamp session
debug ip sla error twamp session
Use the debug ip sla error twamp session command in privileged EXEC mode to enable debugging
output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement Protocol
(TWAMP) showing exceptions during communication between the TWAMP sender and reflector. Use
the no form of this command to disable debugging output.
debug ip sla error twamp session [source-ip ip-address]
no debug ip sla error twamp session [source-ip ip-address]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines The debug ip sla error twamp session privileged EXEC command displays error messages about the
communication between the TWAMP sender and reflector.
Note Use the debug ip sla error twamp session command before using the debug ip sla trace twamp session
command because the debug ip sla error twamp session command generates less debugging output.
The debug ip sla error twamp session command is supported in IPv4 networks.
The undebug ip sla error twamp session command is the same as the no debug ip sla error twamp
session command.
Related Commands
source-ip
ip-address
(Optional) Debug IP Performance Metrics (IPPM) TWAMP connections for
the specified source. Specify the source using the IP address of the client
device.
Release Modification
12.2(52)SE This command was introduced.
Command Description
debug ip sla error twamp
connection
Displays exceptions during communication between the IP SLAs
TWAMP client and server.
debug ip sla error twamp
control reflector
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
debug ip sla error twamp
control server
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
debug ip sla trace twamp
connection
Displays the normal communications between an IP SLAs TWAMP
client and server.
debug ip sla trace twamp
control reflector
Displays the normal communications sent by an IP SLAs TWAMP
reflector to the TWAMP server.