Cisco Catalyst 3750 Metro

2-538
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show mac address-table aging-time
show mac address-table aging-time
Use the show mac address-table aging-time user EXEC command to display the aging time of a
specific address table instance, all address table instances on a specified VLAN or, if a specific VLAN
is not specified, on all VLANs.
show mac address-table aging-time [vlan vlan-id]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines If no VLAN number is specified, the aging time for all VLANs appears.
Examples This is an example of output from the show mac address-table aging-time command:
Switch> show mac address-table aging-time
Vlan Aging Time
---- ----------
1 300
This is an example of output from the show mac address-table aging-time vlan 10 command:
Switch> show mac address-table aging-time vlan 10
Vlan Aging Time
---- ----------
10 300
vlan vlan-id (Optional) Display aging time information for a specific VLAN. The range
is 1 to 4094.
Release Modification
12.1(14)AX This command was introduced.