Cisco Catalyst 3750 Metro - Show Errdisable Detect

2-457
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show errdisable detect
udld Enabled port
vmps Enabled port
Note Though visible in the output, the dhcp-rate-limit and storm-control fields are not valid.
Related Commands Command Description
errdisable detect cause Enables error-disabled detection for a specific cause or all causes.
show errdisable flap-values Displays error condition recognition information.
show errdisable recovery Displays error-disabled recovery timer information.
show interfaces status Displays interface status or a list of interfaces in an error-disabled
state.