Cisco Catalyst 3750 Metro - Show Platform Pm

C-18
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform pm
show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | vlan {info | line-state}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
counters Display module counters information.
group-masks Display EtherChannel group masks information.
idbs {active-idbs |
deleted-idbs}
Display interface data block (IDB) information. The keywords have these
meanings:
• active-idbs—Display active IDB information.
• deleted-idbs—Display deleted and leaked IDB information.
if-numbers Display interface numbers information.
link-status Display local port link status information.
platform-block Display platform port block information.
port-info interface-id Display port administrative and operation fields for the specified physical
or port-channel interface.
vlan {info | line-state} Display platform VLAN information. The keywords have these meanings:
• info—Display information for active VLANs.
• line-state—Display line-state information.
Release Modification
12.1(14)AX This command was introduced.