Cisco Catalyst 3750 Metro

C-10
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform ip policy
show platform ip policy
Use the show platform ip policy privileged EXEC command to display platform-dependent IP policy
information.
show platform ip policy {interfaces | route-map [name]}
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
interfaces Display IP policy interface information.
route-map [name] Display IP policy route-map information. The keyword has this meaning:
• name—(Optional) Display information for the specified route map.
Release Modification
12.1(14)AX This command was introduced.