Cisco Catalyst 3750 Metro - Show Inventory

2-485
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show inventory
show inventory
Use the show inventory user EXEC command to display product identification (PID) information for
the hardware.
show inventory [entity-name | raw]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines The command is case sensitive. With no arguments, the show inventory command produces a compact
display of all identifiable entities that have a product identifier. The compact display shows the entity
location (slot identity), entity description, and the unique device identifier (UDI), including PID, Version
Identifier (VID), and Serial Number (SN) of that entity.
If there is no PID, no output appears when you enter the show inventory command.
For the product identifier (PID) and version identifier (VID) of SFP modules, the output of the show
inventory user EXEC command displays either the correct information or displays Unspecified for the
PID and nothing for the VID if the SFP module does not have PID and VID information.
Examples This is example output from the show inventory command:
Switch> show inventory
NAME: "1", DESCR: "ME-C3750-24TE"
PID: , VID: , SN:
NAME: "GigabitEthernet1/1/2", DESCR: "1000BaseSX SFP"
PID: , VID: , SN: A50015093
entity-name (Optional) Display the specified entity. For example, enter the interface
(such as gigabitethernet1/0/1) into which a small form-factor pluggable
(SFP) module is installed.
raw (Optional) Display every entity in the device.
Release Modification
12.2(25)SEG This command was introduced.