Cisco Catalyst 3750 Metro

2-455
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show env
show env
Use the show env user EXEC command to display fan, temperature, redundant power system (RPS)
availability, and power information for the switch.
show env {all | fan | power | rps | temperature}
Syntax Description
Command Modes User EXEC
Command History
Examples This is an example of output from the show env all command:
Switch> show env all
FAN is OK
TEMPERATURE is OK
POWER is OK
RPS is NOT PRESENT
This is an example of output from the show env fan command:
Switch> show env fan
FAN is OK
all Display both fan and temperature environmental status.
fan Display the switch fan status.
power Display the switch power status.
rps Display whether an RPS 300 Redundant Power System is connected to the switch.
temperature Display the switch temperature status.
Release Modification
12.1(14)AX This command was introduced.