Cisco Catalyst 3750 Metro - Show Platform Spanning-Tree

C-27
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
show platform spanning-tree
show platform spanning-tree
Use the show platform spanning-tree privileged EXEC command to display platform-dependent
spanning-tree information.
show platform spanning-tree synchronization [detail | vlan vlan-id]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
synchronization
[detail | vlan
vlan-id]
Display spanning-tree state synchronization information. The keywords have
these meanings:
• detail—(Optional) Display detailed spanning-tree information.
• vlan vlan-id—(Optional) Display VLAN switch spanning-tree information
for the specified VLAN. The range is 1 to 4094.
Release Modification
12.1(14)AX This command was introduced.