2-47
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
clear l2protocol-tunnel counters
clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
clear l2protocol-tunnel counters [interface-id]
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on a port:
Switch # clear l2protocol-tunnel counters gigabitethernet1/0/2
You can verify that the information was deleted by entering the show l2protocol-tunnel privileged
EXEC command.
Related Commands
interface-id (Optional) Specify interface for which protocol counters are to be cleared.
The interface can be a physical interface or a port channel.
Release Modification
12.1(14)AX This command was introduced.
Command Description
show l2protocol-tunnel Displays information about ports configured for Layer 2 protocol
tunneling.
To Next Page
Loading...
