Cisco Catalyst 3750 Metro - Spanning-Tree Portfast (Interface Configuration)

2-679
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
spanning-tree portfast (interface configuration)
Examples This example shows how to enable Port Fast on a port:
Switch(config)# interface fastethernet1/0/2
Switch(config-if)# spanning-tree portfast
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command Description
show running-config Displays the operating configuration. For syntax information, use
this link to the Cisco IOS Release 12.2 Command Reference listing
page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_c
ommand_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to
navigate to the command.
spanning-tree bpdufilter Prevents an interface from sending or receiving bridge protocol data
units (BPDUs).
spanning-tree bpduguard Puts an interface in the error-disabled state when it receives a
BPDU.
spanning-tree portfast (global
configuration)
Globally enables the BPDU filtering or the BPDU guard feature on
Port Fast-enabled interfaces or enables the Port Fast feature on all
nontrunking interfaces.