Cisco Catalyst 3750 Metro - Page 240

2-212
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
ipv6 mld snooping last-listener-query-count
Examples This example shows how to globally set the last-listener query count:
Switch(config)# ipv6 mld snooping last-listener-query-count 1
This example shows how to set the last-listener query count for VLAN 10:
Switch(config)# ipv6 mld snooping vlan 10 last-listener-query-count 3
You can verify your settings by entering the show ipv6 mld snooping [vlan vlan-id] user EXEC
command.
Related Commands Command Description
ipv6 mld snooping last-listener-query-interval Sets IPv6 MLD snooping last-listener query
interval.
sdm prefer Configures an SDM template to optimize system
resources based on how the switch is being used.
show ipv6 mld snooping querier Displays MLD snooping configuration.