2-228
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
l2protocol-tunnel
Switch(config-if)# l2protocol-tunnel point-to-point udld
Switch(config-if)# l2protocol-tunnel drop-threshold point-to-point pagp 1000
Related Commands Command Description
l2protocol-tunnel cos Configures a class of service (CoS) value for all tunneled Layer 2
protocol packets.
show errdisable recovery Displays errdisable recovery timer information.
show l2protocol-tunnel Displays information about ports configured for Layer 2 protocol
tunneling, including port, protocol, CoS, and threshold.
To Next Page
Loading...
