2-364
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
priority
Examples This example shows how to enable the LLQ for the policy map called policy1:
Switch(config)# policy-map policy1
Switch(config-pmap)# class voice
Switch(config-pmap-c)# priority
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command Description
bandwidth Specifies or modifies the minimum bandwidth provided to a class belonging to
a policy map attached to an ES port.
class Specifies the name of the class whose traffic policy you want to create or
change.
policy-map Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
priority-queue Enables the egress priority queue on a port.
queue-limit Configures the maximum threshold for tail drop in a policy map attached to an
ES port.
random-detect Configures Weighted Random Early Detection (WRED) in a policy map
attached to an ES port.
service-policy
(policy-map class)
Creates a service policy as a quality of service (QoS) policy within a policy
map.
shape Enables traffic shaping in a policy map attached to an ES port.
show policy-map Displays QoS policy maps.
To Next Page
Loading...
