Cisco Catalyst 3750 Metro - Page 401

2-373
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
queue-limit
Examples This example shows how to create a policy map called policy11 for a class called acl203. In the policy
for this class, the queue maximum threshold is set to 30000 packets:
Switch(config)# policy-map policy11
Switch(config-pmap)# class acl203
Switch(config-pmap-c)# bandwidth 2000
Switch(config-pmap-c)# queue-limit 30000
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command Description
bandwidth Specifies or modifies the minimum bandwidth provided to a class
belonging to a policy map attached to an ES port.
class Specifies the name of the class whose traffic policy you want to create
or change.
policy-map Creates or modifies a policy map that can be attached to multiple ports
to specify a service policy.
priority Enables the strict-priority queue and gives priority to a class of traffic
belonging to a policy map attached to an ES port.
random-detect Configures WRED in a policy map attached to an ES port.
service-policy (policy-map
class)
Creates a service policy as a quality of service (QoS) policy within a
policy map.
show policy-map Displays QoS policy maps.