2-389
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
remote-span
This example shows how to remove the RSPAN feature from a VLAN:
Switch(config)# vlan 901
Switch(config-vlan)# no remote-span
You can verify your settings by entering the show vlan remote-span user EXEC command.
Related Commands Command Description
monitor session Enables Switched Port Analyzer (SPAN) and RSPAN monitoring on a port
and configures a port as a source or destination port.
vtp Changes to config-vlan mode where you can configure VLANs 1 to 4094.
To Next Page
Loading...
