Cisco Catalyst 3750 Metro - Page 588

2-560
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show mls qos interface
The port is mapped to qset : 1
This is an example of output from the show mls qos interface interface-id statistics command.
Table 2-26 describes the fields in this display.
Switch> show mls qos interface fastethernet1/0/7 statistics
FastEthernet1/0/7
dscp: incoming
-------------------------------
0 - 4 : 4213 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 6 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
dscp: outgoing
-------------------------------
0 - 4 : 363949 0 0 0 0
5 - 9 : 0 0 0 0 0
10 - 14 : 0 0 0 0 0
15 - 19 : 0 0 0 0 0
20 - 24 : 0 0 0 0 0
25 - 29 : 0 0 0 0 0
30 - 34 : 0 0 0 0 0
35 - 39 : 0 0 0 0 0
40 - 44 : 0 0 0 0 0
45 - 49 : 0 0 0 0 0
50 - 54 : 0 0 0 0 0
55 - 59 : 0 0 0 0 0
60 - 64 : 0 0 0 0
cos: incoming
-------------------------------
0 - 4 : 132067 0 0 0 0
5 - 9 : 0 0 0
cos: outgoing
-------------------------------
0 - 4 : 739155 0 0 0 0
5 - 9 : 90 0 0
Policer: Inprofile: 0 OutofProfile: 0
Note The show mls qos interface interface-id statistics command output might show more throughput than
the actual amount on the interface.