2-577
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show mvr interface
In the preceding display, Status is defined as follows:
• Active means that the port is part of a VLAN
• Up/Down means that the port is forwarding/nonforwarding
Inactive means that the port is not yet part of any VLAN.
This is an example of output from the show mvr interface interface-id command:
switch# show mvr interface fa0/10
Port Type Mode VLAN Status Immediate Leave
---- ---- ---- ---- ------- ---------------
Fa0/10 RECEIVER Trunk 201 ACTIVE/DOWN DISABLED
This is an example of output from the show mvr interface interface-id members command:
Switch# show mvr interface fastethernet1/0/6 members
239.255.0.0 DYNAMIC ACTIVE
239.255.0.1 DYNAMIC ACTIVE
239.255.0.2 DYNAMIC ACTIVE
239.255.0.3 DYNAMIC ACTIVE
239.255.0.4 DYNAMIC ACTIVE
239.255.0.5 DYNAMIC ACTIVE
239.255.0.6 DYNAMIC ACTIVE
239.255.0.7 DYNAMIC ACTIVE
239.255.0.8 DYNAMIC ACTIVE
239.255.0.9 DYNAMIC ACTIVE
Related Commands Command Description
mvr (global configuration) Enables and configures multicast VLAN registration on the
switch.
mvr (interface configuration) Configures MVR ports.
show mvr Displays the global MVR configuration on the switch.
show mvr members Displays all receiver ports that are members of an MVR
multicast group.
To Next Page
Loading...
