Cisco Catalyst 3750 Metro - Page 614

2-586
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
show policy-map
af22 - - 1/10
af23 - - 1/10
af31 - - 1/10
af32 - - 1/10
af33 - - 1/10
af41 - - 1/10
af42 - - 1/10
af43 - - 1/10
cs1 - - 1/10
cs2 - - 1/10
cs3 - - 1/10
cs4 - - 1/10
cs5 - - 1/10
cs6 - - 1/10
cs7 - - 1/10
ef - - 1/10
5 1000 6000 1/2000
rsvp - - 1/10
default - - 1/10
Bandwidth 20 (%)
exponential weight 9
class min-threshold max-threshold mark-probability
----------------------------------------------------------
0 - - 1/10
1 - - 1/10
2 - - 1/10
3 - - 1/10
4 - - 1/10
5 1000 6000 1/2000
6 - - 1/10
7 - - 1/10
rsvp - - 1/10
This is an example of output from the show policy-map interface interface-id command:
Switch> show policy-map interface gigabitethernet1/1/2
GigabitEthernet1/1/2
service-policy output: vlan-policy
class-map: vlan10-class (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
match: vlan 10
Output Queue: Conversation 265
Bandwidth 80 (%) (800000 kbps) Max Thresh 64 (packets)
Statistics:
WRED Packets Drop: 0
WRED Bytes Drop: 0
Tail Packets Drop: 0
Tail Bytes Drop: 0
Related Commands Command Description
policy-map Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.