Cisco Catalyst 3750 Metro - Page 663

2-635
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
snmp-server host
community-string Password-like community string sent with the notification operation. Though
you can set this string by using the snmp-server host command, we
recommend that you define this string by using the snmp-server community
global configuration command before using the snmp-server host
command.
Note The @ symbol is used for delimiting the context information. Avoid
using the @ symbol as part of the SNMP community string when
configuring this command.
notification-type (Optional) Type of notification to be sent to the host. If no type is specified,
all notifications are sent. The notification type can be one or more of the
these keywords:
• bgp—Send Border Gateway Protocol (BGP) state change traps.
• bridge—Send SNMP Spanning Tree Protocol (STP) bridge MIB traps.
• cluster—Send cluster member status traps.
• config—Send SNMP configuration traps.
• copy-config—Send SNMP copy configuration traps.
• cpu threshold—Allow CPU-related traps.
• entity— Send SNMP entity traps.
• envmon—Send environmental monitor traps.
• flash—Send SNMP FLASH notifications.
• hsrp—Send SNMP Hot Standby Router Protocol (HSRP) traps.
• ipmulticast—Send SNMP IP multicast routing traps.
• mac-notification—Send SNMP MAC notification traps.
• msdp—Send SNMP Multicast Source Discovery Protocol (MSDP)
traps.
• ospf—Send Open Shortest Path First (OSPF) traps.
• pim—Send SNMP Protocol-Independent Multicast (PIM) traps.
• port-security—Send SNMP port-security traps.
• rtr—Send SNMP Response Time Reporter traps.
• snmp—Send SNMP-type traps.
• storm-control—Send SNMP storm-control traps.
• stpx—Send SNMP STP extended MIB traps.
• syslog—Send SNMP syslog traps.
• tty—Send TCP connection traps.
• udp-port port—Configure the User Datagram Protocol (UDP) port
number of the host to receive the traps. The range is from 0 to 65535.
• vlan-membership— Send SNMP VLAN membership traps.
• vlancreate—Send SNMP VLAN-created traps.
• vlandelete—Send SNMP VLAN-deleted traps.
• vtp—Send SNMP VLAN Trunking Protocol (VTP) traps.