2-39
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
class
Related Commands Command Description
bandwidth Specifies or modifies the minimum bandwidth provided to a class belonging
to a policy map attached to an ES port.
class-map Creates a class map to be used for matching packets to the class whose name
you specify.
police Configures a single-rate traffic policer for a class of traffic.
police cir Configures a two-rate traffic policer for a class of traffic.
police cir percent Configures a two-rate traffic policer for a class of traffic based on a
percentage of the available bandwidth.
policy-map Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
priority Enables the strict-priority queue and gives priority to a class of traffic
belonging to a policy map attached to an ES port.
queue-limit Configures the maximum threshold for tail drop in a policy map attached to
an ES port.
random-detect Configures WRED in a policy map attached to an ES port.
service-policy Applies a policy map defined by the policy-map global configuration
command to a port.
service-policy
(policy-map class)
Creates a service policy as a QoS policy within a policy map.
set Classifies IP traffic by setting a CoS, a DSCP, an IP-precedence, or the MPLS
EXP bits in the packet.
shape Enables traffic shaping in a policy map attached to an ES port.
show policy-map Displays QoS policy maps.
trust Defines a trust state for the traffic classified through the class policy-map
configuration command.
To Next Page
Loading...
