2-766
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
vrf upgrade-cli multi-af-mode
This example shows how to configure the switch to migrate only the VRF named test to the CLI that
supports IPv4 and IPv6 traffic. All other IPv4 VRFs are not modified.
Switch(config)# vrf upgrade-cli multi-af-mode non-common-policies vrf test
Related Commands Command Description
address-family ipv4 Configures a routing session using standard IPv4 address prefixes.
address-family ipv6 configures a routing session using standard IPv6 address prefixes
vrf definition vrf-name Configures a VPN VRF routing table and enters VRF configuration mode.
vrf forwarding
vrf-name
Associates a Virtual Routing and Forwarding (VRF) instance or a virtual
network with an interface.
To Next Page
Loading...
