52 User Manual Synertia® RF Generator
The information contained in this manual is subject to change by Comet Yxlon without prior notice.
4.7 Connecting AC mains
The generator is shipped without AC mains cable or mating connectors. Connectors to
operate the generator con be ordered as an optional accessory pack. Otherwise,
connectors and cables must be provided by the customer.
The following Harting™ connector components – not supplied by Comet – are example
parts that could be used as mains mating connectors. The P/Ns in brackets are the
corresponding Harting™ part numbers.
If you would like to use for example angled connectors instead, please refer to the
Harting™ product catalogue to find the corresponding P/Ns.
4.7.1 Connector air-cooled generators
• 1 pc. Han 3A Hood Top Entry M25 Low Constr. (P/N: 19 20 003 1421)
• 1 pc. Han Q 2/0-f 1.5-2,5 mm² / 16-14 AWG (P/N: 09 12 002 2755)
Pin Signal
1 Phase
2 Neutral
Table 17: Pin-out Han Q connector
To Next Page
Loading...