Ctera C200 - Agent Licensing; Workflow

12 Centrally Managing CTERA Agents
216 CTERA C-Series User Guide
Agent Licensing
CTERA Agent is licensed differently, depending on your operating system:
Table 41: Agent Licensing per Operating System
When installed on this OS...
The CTERA Agent is licensed as a...
Windows Server
CTERA Server Agent
Other Windows operating systems
CTERA Workstation Agent
Linux
CTERA Server Agent
Mac OS-X
CTERA Workstation Agent
Both agent types offer the same functionality.
CTERA Agent licenses are taken from the licenses included in your appliance. Licenses that
exceed the number included in your appliance are taken from the workstation agent/server
agent quotas allocated to your CTERA Portal account. A license is taken for as long as an
agent is defined in your appliance. If you are no longer using an agent, as an administrator,
you can delete the agent from the appliance using the CTERA Agent Manager.
Table 42: Agent Licenses Included with Your Appliance
Appliance Model
Included Workstation Agents
Included Server Agents
C200
20
0
C400
50
0
C800
50
0
For licensing of additional server or workstation agents, contact your CTERA-authorized
reseller.
Workflow
Central management of CTERA Agents is performed in the appliance Web interface.
To centrally manage CTERA Agents, do the following:
1 Configure global settings for all CTERA Agents.
See Configuring Global Settings for All CTERA Agents (on page 220).
2 If local configuration of the agent is disabled, do the following:
a Configure the agent-specific settings for the CTERA Agent.