Ctera C200 - Configuring Global Disk-Level Backup Settings

Centrally Managing CTERA Agents 12
CTERA C-Series User Guide 227
Table 45: File-Level Backup Tab Fields
In this field...
Do this...
Manual Only
Choose this option to disable automatic backups.
Periodically
Choose this option to specify that automatic backups should be
performed every certain number of hours.
The Start Every field is enabled, and you must complete it.
Start Every
Use the arrows to specify the interval between backups, in
hours.
Specific Time
Choose this option to specify that automatic backups should be
performed at a certain hour on certain days.
The Start Time and On Days fields are enabled, and you must
complete them.
Start Time
Select the hour at which backups should start.
On Days
Specify on which days backups should occur, by selecting the
relevant check boxes or clicking Every Day.
Configuring Global Disk-Level Backup Settings
To configure global disk-level settings for all CTERA Agents
1 In the Configuration tab's navigation pane, click Local Backup > CTERA Agents.
The Local Backup > CTERA Agents page appears.
2 Click Configuration.
The Global Agents Settings window opens displaying the Settings tab.
3 Click the Disk-level Backup tab.