Ctera C200 - Managing Users and User Groups; User Management Overview

Centrally Managing CTERA Agents 12
CTERA C-Series User Guide 241
6 Click Save.
At the bottom of the workspace, the Destination field indicates the folder on the
appliance to which files will be backed up. The Local Disk Space Usage field indicates the
amount of used space on the disk after the next local backup operation, out of the total
amount of space available on the disk.
Manually Starting Agent Backup
The CTERA Agent will automatically back up files, applications, and volumes to the appliance
according to the schedule configured on the appliance. If desired, you can manually trigger
backup at any time.
To manually start backup from the CTERA Agents page
1 In the Configuration tab's navigation pane, click Local Backup > CTERA Agents.
The Local Backup > CTERA Agents page appears.
2 Select the desired CTERA Agent.
3 In the Run drop-down list, click the desired backup type.
The CTERA Agent's status changes to Running, and a progress bar appears.
The CTERA Agent backs up files to the appliance.
To manually start backup from the CTERA Agent Manager
1 Open the CTERA Agent Manager.
See Opening the CTERA Agent Manager (on page 230).
2 Next to the desired backup type, click Go.
A progress bar appears.
The CTERA Agent backs up files to the appliance.
Stopping the Current Backup Operation of an Agent
To stop the current backup operation from the CTERA Agents page
1 In the Configuration tab's navigation pane, click Local Backup > CTERA Agents.
The Local Backup > CTERA Agents page appears.
2 Select the desired CTERA Agent.
3 Click Stop.
The current backup operation is stopped.