Ctera C200 - Filtering Logs; Clearing Logs

17 Monitoring Your CTERA Appliance
312 CTERA C-Series User Guide
Table 74: CTERA Agents Log Fields
This field...
Displays...
Type
An icon indicating the log level. See Log Levels (page 301).
Date
The date and time at which the event occurred.
Source
The name of the CTERA Agent-installed computer that triggered the
event.
Details
A description of the event.
More Info
Additional information about the event.
Filtering Logs
In any log category, you can filter the logs so that only those with a certain minimum log level
are displayed.
Tip
For information on configuring the default minimum log level to display in all log
pages, see Configuring Event Log Settings (on page 296).
To filter logs in a log category
1 View the desired log category.
See Viewing Logs (on page 299).
2 In the Minimum Severity drop-down list, select the minimum log level to display in this
category.
For example, if you select Critical, then only Alert, Critical, and Emergency logs will be
displayed.
The logs are filtered accordingly.
Clearing Logs
You can clear logs for any log category.
To clear logs for a log category
1 View the desired log category.
See Viewing Logs (on page 299).
2 Click Clear.
A confirmation message appears.
3 Click Yes.