Ctera C200 - Resetting the CTERA Appliance to Its Default Settings

Maintenance 18
CTERA C-Series User Guide 331
Table 77: UPS Fields
In this field...
Do this...
Model
The UPS device model.
AC Power
The UPS device's power status. This can be any of the following:
Online
On Battery
Low Battery
Battery
The amount of battery charge remaining.
Est. Protection Time
The estimated amount of protection time remaining.
Resetting the CTERA Appliance to Its Default Settings
You can reset the appliance to its default settings.
Warning
This action erases all of your passwords and settings, and you will need to
reconfigure the appliance as described in Setting Up the CTERA Appliance (on
page 44).
The appliance can be reset to defaults via the appliance Web interface or using the Reset
button on its rear panel.
To reset the appliance to its default settings via the appliance Web interface
1 In the Configuration tab's navigation pane, click System > Configuration Tools.
The System > Configuration Tools page appears.
2 Click Reset to Defaults.
A confirmation message appears.
3 Click Yes.
The appliance is reset to its default settings.
The Login page appears.
To reset the C200 to its default settings using the Reset button
While the appliance is up and running, press the Reset button for at least 10 seconds.
The appliance is reset to its default settings and reboots.
To reset the C400/C800 to its default settings using a serial cable
1 Shut down the appliance.