17 Monitoring Your CTERA Appliance
290 CTERA C-Series User Guide
For information on log fields, see Using CTERA appliance Logs.
Table 56: Hard Drive Statuses
This drive is in a RAID array and is in optimal condition.
The drive is not in a RAID array and is in optimal condition.
The hard drive has failed.
The hard drive contains unrecognized data. You must format the hard
drive before it can be used.
This drive is in a RAID array, but is currently not in use.
This drive is in a RAID array that is currently being rebuilt.
The drive is currently in use.
The array is in optimal condition.
The array is accessible and there is no data loss; however, the array type
is RAID1 (Mirroring), and a disk is failed or missing. Performance and
reliability may be reduced. Replace the failed drive as soon as possible.
The array is not accessible.
A degraded array is being repaired. The appliance is currently
synchronizing out-of-sync members of the array, and performance of
the appliance may be reduced. Once the recovery is finished, the array
will return to optimal state.
Data scrubbing is in progress.
To Next Page
Loading...
