CTS FOS-3126-PLUS SERIES - Page 29

29
“any”: Specify “any” to apply ACL rule
to any destination MAC addresses.
“uc”: Specify “uc” to apply ACL rule to
unicast traffic.
“mc”: Specify “mc” to apply ACL rule
to multicast traffic.
“bc”: Specify “bc” to apply ACL rule to
broadcast traffic.
“xx:xx:xx:xx:xx:xx”: Enter the
specific destination MAC address.
[mac_mask]
Specify MAC mask.
“any”: Specify “any” mean any MAC
mask.
“ff:ff:ff:00:00:00”: Enter a specific
MAC mask.
[ether_type]
“any”: Specify “any” to apply ACL rule
to any Ether types.
“0xXXXX”: Enter the specific Ether
Type.
Switch(config-acl-RULE)#
frame-type icmp
[dest_mac] [icmp_type]
[icmp_code] [source_ip]
[ip_mask] [dest_ip]
[ip_mask] [ip_ttl]
[ip_fragment] [ip_option]
[dest_mac]
Define the destination MAC filtering
type.
“any”: Specify “any” to filter any kind
of traffic.
“uc”: Specify “uc” to filter unicast
traffic.
“mc”: Specify “mc” to filter to filter
multicast traffic.
“bc”: Specify “bc” to filter broadcast
traffic.
[icmp_type]
This parameter is to show and filter the
ICMP type defined in the type field of
the ICMP header.
“any”: Specify “any” to filter any types.
“0-255”: Specify “0-255” to filter
different defined types.