Switch(config)# no switch-info company-name
Delete the entered company name
information.
Switch(config)# no switch-info system-contact
Delete the entered system contact
information.
Switch(config)# no switch-info system-location
Delete the entered system location
information.
Switch(config)# no switch-info system-name
Delete the entered system name
information.
Switch(config)# no switch-info host-name
Set the hostname to the factory default.
Switch(config)# show switch-info
Show or verify switch information including
company name, system contact, system
location, system name, model name,
firmware version and fiber type.
Switch(config)# switch-info company-name
telecomxyz
Set the company name to “telecomxyz”.
Switch(config)# switch-info system-contact
info@company.com
Set the system contact field to
“info@compnay.com”.
Switch(config)# switch-info system-location
13thfloor
Set the system location field to “13thfloor”.
Switch(config)# switch-info system-name
backbone1
Set the system name field to “backbone1”.
Switch(config)# switch-info host-name
edgeswitch10
Change the Managed Switch‟s hostname
to “edgeswitch10”.
2.6.23 User Command
1. Create a new login account.
Switch(config)# user name
[user_name]
Enter the new account‟s username. The
authorized user login name is up to 20
alphanumeric characters. Only 3 login
accounts can be registered in this device.
Switch(config-user-
NAME)# active
Activate this user account.
Switch(config-user-
NAME)# description
[description]
Enter the brief description for this user
account.
Switch(config-user-
NAME)# password
[password]
Enter the password, up to 20 alphanumeric
characters, for this user account.
Switch(config-user-
NAME)# ip-address
[A.B.C.D]
Enter the IP address for IP security function.
Switch(config-user-
NAME)# ip-security
Enable IP security function. When enabled,
only the legitimate IP address can login to
the Managed Switch.
To Next Page
Loading...
Need help?
General
