4.3.8 Mal-attempt Log Configuration
Click the option Trap Configuration from the Network Management menu and then the following
screen page appears.
When DHCP snooping filters unauthorized DHCP packets on the network, the Mal-attempt log will
allow the Managed Switch to send event notification message to Log server.
Log Server: Enable or disable Mal-attempt log function.
SNTP Status: View-only field that shows the SNTP server status.
Log Server IP-1: Specify the default Log server IP address.
Log Server IP-2: Specify the second Log server IP address. When the default Log Server is down,
the Managed Switch will automatically contact the second or third Log server.
Log Server IP-3: Specify the third Log server IP address. When the default Log Server is down,
the Managed Switch will automatically contact the second or third Log server.
4.4 Switch Management
In order to manage the Managed switch and set up required switching functions, click the folder
icon Switch Management from the Main Menu and then several options and folders will be
displayed for your selection.
1. Switch Configuration: Set up frame size, address learning, etc.
To Next Page
Loading...
Need help?
General
